Working torque range- 50-450 ft.lb
Max torque @ 90PSI in reverse- 625 ft.lb
Weight- 6.2Lbs
Three power settings in forward and 1 in reverse
Max torque @ 90 PSI- Reverse 670 ft. lbs
Free speed RPM- 10020
Weight- 6.5Lbs
Working torque range- 75-500 ft.lb
Max torque @ 90 PSI- Reverse 922 ft.lb
Free speed RPM- 8200
Weight- 4.9Lbs
2 setting positions : one in Reverse and one Torque Limited in forward
60/70 ft. lbs. - 90/100 Nm in torque limited position in forward
920 ft.lbs - 1,250Nm of maximum torque in reverse
Full teasing trigger allows full control. Lightweight composite handle weighs less than standard metal impact wrenches. Two position power setting regulator in forward and reverse for maximum control.
Full teasing trigger allows full control. Lightweight composite handle weighs less than standard metal impact wrenches. Three position power setting regulator in forward and full power reverse for maximum control.
1/2" Battery Powered Brushless Impact. 4 Settings in forward to prevent over torqueing. 850 ft.lbs of power in reverse. LED lights on front of tool. Kit comes with 2 batteries and charger. CP88492K = 2" Extended anvil.
Working torque range- 150-70 ft.lb
Max torque @90PSI in reverse- 1,000 ft.lb
Blows per minute- 900
Free speed RPM- 4,200
Weight- 11.6lbs
Working torque range- 100-950 ft.lb
Max torque @90PSI in reverse- 1150 ft.lb
Blows per minute- 840
Free speed RPM- 6,300
Weight- 13.7lbs
Working torque range- 300-1,080 ft.lb
Max torque @90PSI in reverse- 1,440 ft.lb
Blows per minute- ,1200
Free speed RPM- 6,500
Weight- 6.9lbs
1" square drive
Working torque range- 100-1200 ft.lb
Max torque @90PSI in reverse- 1,550 ft.lb
Blows per minute- 750
Free speed RPM- 5500
Weight- 25.4 Lbs
1" square drive
Working torque range- 440-1,850 ft.lb
Max torque @90PSI in reverse- 2,140
Free speed RPM- 5,200
Blows per minute- 500
Weight- 22.2 Lbs
1" spline drive
Working torque range- 440-1,850 ft.lb
Max torque @90PSI in reverse- 2,140
Free speed RPM- 5,200
Blows per minute- 500
Weight- 22.2 Lbs
1" Lightweight Low Air Square Drive
Working torque range- 413-1,253 ft.lb
Max torque @90PSI in reverse- 1,770
Free speed RPM- 6,200
Blows per minute- 500
Weight- 20.9 Lbs
Low speed buffer
Chuck size/wheel size- 7/16"
Free speed RPM- 2,800
Weight- 2.25 Lbs
Die Grinder
Colet size- 1/4"
Free speed RPM- 30,000
.3HP
Length- 4.75"
Weight- .75lbs
Sander
Variable Speed .71 hp. Pad diameter- 7"
Weight- 5.1 Lbs
Average air consumption- 26.7 CFM with 1/4"NPTF and min 3/8" hose.
Angle Grinder
Free speed RPM- 12,000. Wheel size- 4"
Length- 9". Weight-3.75lbs
Min air hose- 3/8"
Sander
Free speed RPM- 5,000
Pad diameter- 7"
Weight- 6.5 Lbs
Average air consumption- 13.25 CFM with 1/4"NPTF and min 3/8" hose.
Angle Grinder
12,00 RPM - 5" .8 HP , 4.62 lb. BR = 5/8-11 spindle thread. CR = 3/8-24 spindle thread.
